The Oil Rubbed Bronze Rainier Lever with Arched Rose is a fine example of how beautiful and stylish rustic hardware can be. It was created using a method known as sandcasting, which results in slight variations in each piece since no two molds are ever the same. This Rainier Leverset is made to fit doors with backsets of either 2-3/8 inches or 2-3/4 inches and will adjust to fit doors 1-1/4 inches to 2 inches thick.

Sandcasting is a process for casting metal in sand molds. The mold is made by packing the sand around a pattern. Molten brass is then poured into a mold cavity formed out of sand. Each sand mold is used only once. The sand is then recycled for the next piece.

Features for the Rainier Lever with Sandcast Brass Scalloped Rosette:

• Solid Brass Construction
• Cycle Tested to ANSI Standards
• Reversible Latchbolt in matching/coordinating finish
• Easy assembly with alignment block and rose posts

Specifications for the Fusion BQ Rainier Lever with G1 Scalloped Rose:

• Finish: Oil Rubbed Bronze
• Lever Length: 4"
• Lever Projection: 2-1/4"
• Rose Length: 3-5/8"
• Rose Width: 2-7/8"
• Rose Projection: 1/2”
• Door Thickness: 1-1/4" to 2"
• Backsets: Either 2-3/8" or 2-3/4"
• Material: Sandcast Brass
• Standard Latch Rotation is 40 Degrees.
• Square corner latches and strike plates
• Lifetime Limited Warranty on workmanship, materials, and operation.

When Selecting a Function:

• Single Dummy: Non-functional pull to match trim on one side of the door. Just for looks, it does not latch and does not lock.
• Dummy Set: Non-functional pull to match trim on both sides of the door. Just for looks, it does not latch and does not lock.
• Passage (Hall or Closet): For doors that don't need locking.
• Privacy (Bedroom or Bathroom): For doors that could need locking.