|
| |
|
Title/Description |
|
|
|
 |
|
3 Inch Round Universal Floor Bumper, Deltana UFB7500
Made by Deltana, the Large 3 Inch Modern Round Door Stop is a heavy duty door bumper. The 3 Inch Round Universal Floor Bumper is large enough to stand up to even the biggest doors. This solid brass door stopper comes packaged with a cement bolt for a secure installation. It is available in a wide selection of finishes.
|
|
|
 |
|
Heavy Duty Overhead Door Holder, Don-Jo 3212
This heavy Duty Overhead Door Holder / Stop provides a durable Hold-Open mechanism that can be turned off, allowing the unit to function as a shock-absorbing stop. The Hold-Open tension is simply adjusted incrementally for increased or decreased holding power by turning the nut at the end of the 1/2 inch diameter stainless steel bar.
|
|
|
 |
|
Oversized Universal Floor Bumper, Deltana UFBS25
This Oversized Universal Floor Bumper is perfect for large spaces. It's big, so it will be sure to stand out even amongst the largest doors. It is 2-1/2 inches tall and has a base width of 1-5/8 inches. This Extra Large 2-1/2 Inch Modern Square Door Stop is made out of solid brass, so it will definitely be able to withstand the test of time.
|
|
|
 |
|
3 Inch Hook Door Stop, Don-Jo 1453
The 3 inch high floor mounted door stop with hold open hook is made of solid brass by Don-Jo. This medium size floor mount door stop is typically used in residential and medium duty commercial applications. Packaged complete with all installation hardware including a heavy duty floor anchor for solid mounting.
|
|
|
 |
|
2-3/16 Inch Stainless Steel Door Stop, Omnia 7000/55
The 2-3/16 Inch Door Stop is made out of stainless steel with a brushed stainless steel finish. This is a floor mounted door bumper and comes packaged with the necessary mounting hardware. The 2-3/16 Inch Stainless Steel Door Stop has a black rubber bumper.
|
|
|
 |
|
Stop Bumper for LCN 2030 Series, LCN-2030-169-N
This is the New Style door stop for LCN 2030 Series (LCN Pacer) Concealed Door Closer. These stop cushions mount into the door closer track and are held in place with the (2) included set screws.
Must have LCN 2030-3038 new style track
|
|
|
 |
|
Stop Bumper for LCN 4111T Closer, LCN-4110T-169-N
This is the New Style door stop for LCN 4111T Track Closer (LCN Super Smoothee) Surface Mount Track Arm Closer. These stop cushions mount into the door closer track and are held in place with the (2) included set screws.
Must have LCN 4110T-3038 new style track
|
|
|
 |
|
Heavy Duty 8 Inch Hands Free Door Stop, Imperial USA GH-6015
A great solution for commercial doors, this hands free step on door holder mounts to the bottom of the door. Pushing the plunger down with your foot using the extra big foot pad holds the door open. Then, simply toe the release tab to deactivate the door stop. The Heavy Duty 8 Inch Hands Free Door Stop is easy to install. It comes packaged with all the necessary mounting hardware. This Heavy Duty Plunger Door Holder includes a non-skid rubber tip to protect the floor.
|
|
|
 |
|
Satin Brass 8 Inch Step On Door Holder, Imperial USA GH-6015-US4
The Satin Brass 8 Inch Step On Door Holder is easy to operate. Simply install near the bottom of the door. Pressing down on the extra large foot pad actives the door stop, keeping the door in the open position. To deactivate the plunger door holder, simply press on the release tab with your foot--making the use of this spring loaded plunger doorstop completely hands free. It has a non-skid rubber tip to protect the floor. The Heavy Duty 8 Inch Hands Free Door Stop is easy to install. It comes packaged with all the necessary mounting hardware.
|
|
|
 |
|
Replacement Rubber Door Stop Bumper for UFBS138, Deltana RUBBERTIP-UFBS
This is a rubber replacement bumper for the Deltana UFBS138 Solid Brass Modern Square Door Stop. It is available in Gray or Black rubber.
|
|
|
 |
|
Heavy Duty Commercial Hinge Pin Door Stop, Don-Jo 1512
The Commercial Hinge Pin Door Stop keeps both walls and hardware safe without putting stress on the door, the door frame, or the wall. The hinge pin stop hits on the hinge leaf--that's why it doesn't need a rubber bumper! This type of door stop is also great for use on doors where a standard door stop just isn't possible such as where one door opens into another door. It is easy to install, just remove the stock hinge pin from your 4.5 inch x 4.5 inch commercial hinges and replace with the hinge pin door stop. The 1512 Door Stop allows the door to open up to 170 degrees, but you can adjust it to open as wide as you want. Available in brass, chrome, and oil rubbed bronze finishes.
|
|
|
 |
|
Replacement Rubber Tip Don-Jo 1458 Plunger Door Stop, Don-Jo 1458-RUB
This is a replacement rubber tip fits the Don-Jo 1458 Spring Loaded Plunger Door Stop. It is held in place with the centered screw. It is very easy to replace. To do so, simply remove the screw to pull the old rubber tip out of the door stop. Then, slide the replacement tip in and attach with the screw you removed. And the best part about the installation is that the plunger door stop does NOT have to be removed from the door to replace the rubber tip.
|
|
|
 |
|
Modern Residential Hinge Pin Door Stop, Don-Jo 1507
The Modern Residential Hinge Pin Door Stop is great for those who don't want their door stops awkwardly protruding from their doors. It keeps both your walls and your hardware safe without putting stress on the door, the door frame, or the wall because the hinge pin stop hits the hinge leaf. That's why it doesn't need a rubber bumper! This type of door stopper is also great for use on doors where a traditional door stop just isn't possible such as where one door opens into another door. It is easy to install, just remove the standard hinge pin and replace with the hinge pin door stop. The 1507 stop allows the door to open up to 170 degrees, but you can adjust it to open as wide as you want. Available in Polished Brass, Oil Rubbed Bronze, Satin Nickel, and Polished Chrome finishes.
|
|
|
 |
|
36 Inch Rain Guard Vinyl Blade Sweep, NGP 101V-36
This rain guard door sweep has a 3/4" projection off the door to channel water away for the door. Vinyl blade sweep help seal the doors bottom specially if there is a gap. Made from Aluminum alloy 6063 and has slotted screw holes for easy adjustments. Available in Aluminum or Dark Bronze finish.
|
|
|
 |
|
3 Inch Universal Door Stop, Deltana UFB6000
The 3 Inch Universal Door Stop is a floor mounted door bumper that is easy to install. All you have to do is drill one hole. The 3 Inch Round Universal Floor Bumper is available in a huge selection of finish colors. It is made from high-quality solid brass. Deltanta's UFB6000 Door Stop is 3 inches tall with a 1-1/8 inch Diameter.
|
|
|
 |
|
Satin Nickel Magnetic Dome Door Stop, Prime Hardware MDS114U15
There are 2 main sections to this Satin Nickel magnetic door stop. The 1-1/4" high dome style base section has a permanent magnet on the face. It is mounted to the floor with the included anchors and screws. The magnet is spring-loaded to absorb shocks.
|
|
|
 |
|
ADA Compliant Door Stop Arm Closer, PDQ 5101-BC-SCS
Door stop arm door closers are non-handed, and and can be mounted on the Push or Pull side of the door. Uses adjustable backcheck to slow the door opening and a rubber stop integrated into the closer arm to stop the door. When installing the closer, door stop can be set from 85 to 110 degrees of door opening angle. Grade 1, ADA compliant, available in Aluminum or Dark Bronze finish.
|
|
|
 |
|
3-3/4 Inch Oil Rubbed Bronze Door Stop, Fusion BSDS-02-ORB
Fusion's Base Door Stop is a great way to protect your wall and your door knobs. This Oil Rubbed Bronze finis door stop has a 3-3/4 inch projection and is made of solid brass.
|
|
|
 |
|
3-1/4 Inch Antique Copper Door Stop, Fusion SHDRSSOL-ATC-3500
Fusion's Antique Copper Base Board Door Stop is a great way to protect your wall and your door knobs. This door stop has a 3-1/4 inch projection and is made of solid brass.
|
|
|
 |
|
Stainless Steel Floor Mount Glass Door Hold Open & Stop
Stainless steel with black rubber bumper ring for use of doors up to 2-3/8" thick. Easy to install. Concealed mounting for a clean installation. For use on residential and commercial doors. Easy to operate. Simply pivot the end of the stop with your foot. The smaller rubber bumper will cradle the door holding it open. Kick it back when you want to close the door. With rubber bumper rings on both sides protect your doors.
|
|
|
|
Page 10 of 11
|
