|
| |
|
Title/Description |
|
|
|
 |
|
Modern Residential Hinge Pin Door Stop, Don-Jo 1507
The Modern Residential Hinge Pin Door Stop is great for those who don't want their door stops awkwardly protruding from their doors. It keeps both your walls and your hardware safe without putting stress on the door, the door frame, or the wall because the hinge pin stop hits the hinge leaf. That's why it doesn't need a rubber bumper! This type of door stopper is also great for use on doors where a traditional door stop just isn't possible such as where one door opens into another door. It is easy to install, just remove the standard hinge pin and replace with the hinge pin door stop. The 1507 stop allows the door to open up to 170 degrees, but you can adjust it to open as wide as you want. Available in Polished Brass, Oil Rubbed Bronze, Satin Nickel, and Polished Chrome finishes.
|
|
|
 |
|
3 Inch Universal Door Stop, Deltana UFB6000
The 3 Inch Universal Door Stop is a floor mounted door bumper that is easy to install. All you have to do is drill one hole. The 3 Inch Round Universal Floor Bumper is available in a huge selection of finish colors. It is made from high-quality solid brass. Deltanta's UFB6000 Door Stop is 3 inches tall with a 1-1/8 inch Diameter.
|
|
|
 |
|
ADA Compliant Door Stop Arm Closer, PDQ 5101-BC-SCS
Door stop arm door closers are non-handed, and and can be mounted on the Push or Pull side of the door. Uses adjustable backcheck to slow the door opening and a rubber stop integrated into the closer arm to stop the door. When installing the closer, door stop can be set from 85 to 110 degrees of door opening angle. Grade 1, ADA compliant, available in Aluminum or Dark Bronze finish.
|
|
|
 |
|
3-3/4 Inch Oil Rubbed Bronze Door Stop, Fusion BSDS-02-ORB
Fusion's Base Door Stop is a great way to protect your wall and your door knobs. This Oil Rubbed Bronze finis door stop has a 3-3/4 inch projection and is made of solid brass.
|
|
|
 |
|
3-1/4 Inch Antique Copper Door Stop, Fusion SHDRSSOL-ATC-3500
Fusion's Antique Copper Base Board Door Stop is a great way to protect your wall and your door knobs. This door stop has a 3-1/4 inch projection and is made of solid brass.
|
|
|
 |
|
Stainless Steel Floor Mount Glass Door Hold Open & Stop
Stainless steel with black rubber bumper ring for use of doors up to 2-3/8" thick. Easy to install. Concealed mounting for a clean installation. For use on residential and commercial doors. Easy to operate. Simply pivot the end of the stop with your foot. The smaller rubber bumper will cradle the door holding it open. Kick it back when you want to close the door. With rubber bumper rings on both sides protect your doors.
|
|
|
 |
|
4 Inch Baseboard Door Bumper, Emtek 2231
The 4 Inch Baseboard Door Bumper is easy to install, it just screws right into the door! Choose your favorite of all of Emteks' best finish colors. This standard door stop will protect not just the wall, but your door knob or lever as well.
|
|
|
 |
|
Goose Style Door Stop, Emtek 2253
This 2-7/8" high floor mounted door stop is made of solid brass by Emtek. It is packaged complete with all installation hardware. Choose from a huge selection of finish colors.
|
|
|
 |
|
Satin Stainless Steel Floor Door Stop, FDS731-630
Satin stainless steel floor door stop with black bumper ring. Very easy to install. Just unscrew door stops top then screw directly to a wood surface or to the included floor anchor. Made of 304 stainless steel.
|
|
|
 |
|
Hinge Pin Door Stop, Emtek 2241
The Emtek Hinge Pivot Stop is for use with solid brass hinges. This Hinge Pin Door Stop is mounted on a door hinge pin instead of on the floor or baseboard. Easily adjustable, simple to use, out of the way and out of sight. We use them on or doors to keep the stops out of reach of the crawling babies! Choose your favorite of the many available finishes.
|
|
|
 |
|
Dome Door Stop, Emtek 2251
Typically dome door stops are used in commercial buildings such as schools, shopping malls and offices. The Dome Door Stop is mounted to the floor and comes packaged with mounting hardware. The Half Dome Door Stop is available in a wide selection of finish colors.
|
|
|
 |
|
Transitional 3-1/2 Inch Door Stop, Deltana UFBD3505
The Transitional 3-1/2 Inch Door Stop is made out of solid brass and is available in a wide selection of finish colors. Its graceful design is stunning in any finish. This floor mounted door bumper is ideal for transitional decors. The 3-1/2 Inch Transitional Brass Floor Door Stop is easy to install by drilling a single hole.
|
|
|
 |
|
1-1/2 Inch Cylinder Floor Bumper, Emtek 2257
The 1-1/2 Inch Cylinder Floor Bumper comes packaged with the necessary mounting screws. This door bumper is mounted to the floor to protect the wall from damage from your door knob. It is made out of solid brass and comes in your choice of fashionable finish colors.
|
|
|
 |
|
Modern Cube Door Stop, Deltana FDBB134
Deltana's 1-3/4" modern cube door stop is mounted to the floor, allowing the bottom of the door to contact it. It is easy to install with the included mounting hardware. If using near a wall, you want to mount this in a position so that the bumper makes contact before the door lever hits the wall. Thus protecting not just the door, but the wall and door lever as well. Available Matte Black, Polished or Brushed Stainless Steel finishes.
|
|
|
 |
|
Rubber Door Silencer, 100 Pack, Don-Jo 1608
Don-Jo 1608 Rubber Door Silencer, 100 pack. This door cushioning rubber is for use on Metal Door Frames. The dark gray rubber cushions push into a 3/16" - 1/4" diameter hole that is drilled in a metal door frame. Normally used on commercial, hospital and hospitality doors to silence the door.
|
|
|
 |
|
TL7 Tubular Magnetic Latch, Inox TL771
The TL7 is a perfect choice for frameless and flush-to-wall doors. The TL7 magnetic latch is available in both 2-3/8 inch (60mm) and 2-3/4 inch (70mm) backsetd. For passage, privacy, or half passage functions, TL7 latch, bolt, and strike incorporate neodymium rare earth magnets, the most powerful magnet available for commercial use with Inox and Emtek Levers. This is a 28-degree retraction latch.
|
|
|
 |
|
12mm Concealed Magnetic Catch, Precision PLS12PRO
This is a silent magnetic catch that makes keeping problematic doors such as double sliding doors shut easy. This Concealed Magnetic Catch is easy to install, simply drill a 1/2 inch hole 3/8 inches deep in both the door and the frame and screw in the catch. The package includes 4 shims that allow you to change the distance between the two magnets in order to adjust the holding strength. The Heavy Duty Concealed Magnetic Catch is suitable for full size doors. Unlike a roller or ball catch, the 12mm Concealed Magnetic Catch does not have a latch noise when opening and shutting door and is completely concealed when door closed with no unsightly protruding strike plate lip.
|
|
|
 |
|
Stainless Steel Floor Door Stop, AHI 731-630
Solid stainless steel with black bumper ring. Very easy to install. Just unscrew door stops top then screw directly to a wood surface or to the included floor anchor. Satin stainless steel finish.
|
|
|
 |
|
Adhesive Mount Wall Door Stop, DWD-WS726-630
1-1/2" long adhesive mount wall door stop. Stick onto tile, glass, metal or any smooth clean surface.
|
|
|
 |
|
Satin Stainless Steel Floor Mount Door Stop, DWD-FDS72750-630
The Satin Stainless Steel Floor Mount Door Stop has a contemporary design that makes it perfect for modern spaces. It is easy to install, simply remove the bumper tip and screw directly to a wood surface or to the included anchor. This floor mounted door stop is 2 inches long and has a black rubber tip.
|
|
|
|
Page 10 of 11
|
