|
| |
|
Title/Description |
|
|
|
 |
|
Surface Wall Mount Electromagnetic Door Holder, ABH 2300
Electromagnetic Door Holders like this one are typically used on fire / smoke barrier doors in conjunction with fire alarm systems and a door closer. Durring a non-emergency situation--when the fire alarm is not triggered--the door is held in the open position by a magnet. By itself, it has about 35 lbs. of holding force so the door can be closed manually. When the fire alarm system is triggered, power to the electromagnet cuts off so that a door closer can then close the door. This system has been approved by both the California Fire Marshall and the City of New York's MEA index set by the Department of Buildings. The Surface Wall Mount Electromagnetic Door Holder can also be used on private offices to hold the door open until it is released by a remote switch.
|
|
|
 |
|
Adhesive Wall Bumper, Don-Jo 1401
Large round 1-13/16" adhesive wall bumper is easy to install, just peel and stick in your desired location.
The rubber bumper is concave in the center to accept the locking push button of a door knob/lever, so it will not self lock. Available in Gray or White rubber.
|
|
|
 |
|
Hinge Pin Door Stop for Standard Weight Commercial Hinges, Don-Jo 1513
The Don-Jo 1513 Hinge Pin Door Stop keeps both walls and hardware safe without putting stress on the door, the door frame, or the wall. The hinge pin stop hits on the hinge leaf--that's why it doesn't need a rubber bumper! This type of door stop is also great for use on doors where a standard door stop just isn't possible such as where one door opens into another door. It is easy to install, just slide the hinge pin doorstop on the pin of your standard weight commercial hinges before replacing the pin in the hinge. The 1513 Door Stop can be adjusted while installed for fine tuning. In fact, this Hinge Pin Stop allows the door to open up to 170 degrees, but you can adjust it to open as less wide if you want. Available in satin nickel, chrome, and oil rubbed bronze finishes.
|
|
|
 |
|
1-5/8 Inch Floor Door Stop, Don-Jo 1448
The 1-5/8 inch high floor mounted door stop is made of solid brass by Don-Jo. This medium size floor mount door stop is typically used in both residential and commercial applications. Packaged complete with all installation hardware, available in 3 different finishes.
|
|
|
 |
|
Contemporary Satin Nickel Door Stop, DWD-BDS350U15
Not only does this contemporary Satin Nickel door stop look great, it is made to last from solid brass. It is easy to install; just screw onto the baseboard casement or door bottom and it will protect your doors, walls, knobs or levers. It includes both gray and white rubber tips and installation screw.
|
|
|
 |
|
2-1/2 Inch Floor Door Stop, Don-Jo 1449
The 2-1/2 inch high floor mounted door stop is made of solid brass by Don-Jo. This medium size floor mount door stop is typically used in both residential and commercial applications. Packaged complete with all installation hardware, available in 3 different finishes.
|
|
|
 |
|
3 Inch Round Universal Floor Bumper, Deltana UFB7500
Made by Deltana, the Large 3 Inch Modern Round Door Stop is a heavy duty door bumper. The 3 Inch Round Universal Floor Bumper is large enough to stand up to even the biggest doors. This solid brass door stopper comes packaged with a cement bolt for a secure installation. It is available in a wide selection of finishes.
|
|
|
 |
|
Heavy Duty Overhead Door Holder, Don-Jo 3212
This heavy Duty Overhead Door Holder / Stop provides a durable Hold-Open mechanism that can be turned off, allowing the unit to function as a shock-absorbing stop. The Hold-Open tension is simply adjusted incrementally for increased or decreased holding power by turning the nut at the end of the 1/2 inch diameter stainless steel bar.
|
|
|
 |
|
Oversized Universal Floor Bumper, Deltana UFBS25
This Oversized Universal Floor Bumper is perfect for large spaces. It's big, so it will be sure to stand out even amongst the largest doors. It is 2-1/2 inches tall and has a base width of 1-5/8 inches. This Extra Large 2-1/2 Inch Modern Square Door Stop is made out of solid brass, so it will definitely be able to withstand the test of time.
|
|
|
 |
|
3 Inch Hook Door Stop, Don-Jo 1453
The 3 inch high floor mounted door stop with hold open hook is made of solid brass by Don-Jo. This medium size floor mount door stop is typically used in residential and medium duty commercial applications. Packaged complete with all installation hardware including a heavy duty floor anchor for solid mounting.
|
|
|
 |
|
2-3/16 Inch Stainless Steel Door Stop, Omnia 7000/55
The 2-3/16 Inch Door Stop is made out of stainless steel with a brushed stainless steel finish. This is a floor mounted door bumper and comes packaged with the necessary mounting hardware. The 2-3/16 Inch Stainless Steel Door Stop has a black rubber bumper.
|
|
|
 |
|
Stop Bumper for LCN 2030 Series, LCN-2030-169-N
This is the New Style door stop for LCN 2030 Series (LCN Pacer) Concealed Door Closer. These stop cushions mount into the door closer track and are held in place with the (2) included set screws.
Must have LCN 2030-3038 new style track
|
|
|
 |
|
Stop Bumper for LCN 4111T Closer, LCN-4110T-169-N
This is the New Style door stop for LCN 4111T Track Closer (LCN Super Smoothee) Surface Mount Track Arm Closer. These stop cushions mount into the door closer track and are held in place with the (2) included set screws.
Must have LCN 4110T-3038 new style track
|
|
|
 |
|
3 Inch Baseboard Door Bumper, Emtek 2232
The 3 Inch Baseboard Door Bumper screws onto the baseboard casement or door bottom to protect not just the wall, but your door knob or lever as well. It comes packaged with the mounting hardware. The Baseboard Door Stop is available in array of Emtek's great finishes.
|
|
|
 |
|
Slim Wall Mount Door Stop, DWD-BDS725S-630
This 3-1/4" length slim wall mount door stop features a wide 2" diameter mounting base for better load distribution and stability plus concealed mounting screws for clean looks. For use in residential and commercial applications.
|
|
|
 |
|
Heavy Duty 8 Inch Hands Free Door Stop, Imperial USA GH-6015
A great solution for commercial doors, this hands free step on door holder mounts to the bottom of the door. Pushing the plunger down with your foot using the extra big foot pad holds the door open. Then, simply toe the release tab to deactivate the door stop. The Heavy Duty 8 Inch Hands Free Door Stop is easy to install. It comes packaged with all the necessary mounting hardware. This Heavy Duty Plunger Door Holder includes a non-skid rubber tip to protect the floor.
|
|
|
 |
|
Satin Brass 8 Inch Step On Door Holder, Imperial USA GH-6015-US4
The Satin Brass 8 Inch Step On Door Holder is easy to operate. Simply install near the bottom of the door. Pressing down on the extra large foot pad actives the door stop, keeping the door in the open position. To deactivate the plunger door holder, simply press on the release tab with your foot--making the use of this spring loaded plunger doorstop completely hands free. It has a non-skid rubber tip to protect the floor. The Heavy Duty 8 Inch Hands Free Door Stop is easy to install. It comes packaged with all the necessary mounting hardware.
|
|
|
 |
|
Concealed Magnetic Catch, Precision PLS24PRO
This is a silent magnetic catch that makes keeping problematic doors such as double sliding doors shut easy. This Concealed Magnetic Catch is easy to install, simply drill a 15/16 inch hole 3/8 inches deep in both the door and the frame and screw in the catch. The package includes 4 shims that allow you to change the distance between the two magnets in order to adjust the holding strength. The Heavy Duty Concealed Magnetic Catch is suitable for full size doors. Unlike a roller or ball catch, the Precision Concealed Magnetic Door Catch does not have a latch noise when opening and shutting door and is completely concealed when door closed with no unsightly protruding strike plate lip.
|
|
|
 |
|
Heavy Duty Commercial Hinge Pin Door Stop, Don-Jo 1512
The Commercial Hinge Pin Door Stop keeps both walls and hardware safe without putting stress on the door, the door frame, or the wall. The hinge pin stop hits on the hinge leaf--that's why it doesn't need a rubber bumper! This type of door stop is also great for use on doors where a standard door stop just isn't possible such as where one door opens into another door. It is easy to install, just remove the stock hinge pin from your 4.5 inch x 4.5 inch commercial hinges and replace with the hinge pin door stop. The 1512 Door Stop allows the door to open up to 170 degrees, but you can adjust it to open as wide as you want. Available in brass, chrome, and oil rubbed bronze finishes.
|
|
|
 |
|
Replacement Rubber Tip Don-Jo 1458 Plunger Door Stop, Don-Jo 1458-RUB
This is a replacement rubber tip fits the Don-Jo 1458 Spring Loaded Plunger Door Stop. It is held in place with the centered screw. It is very easy to replace. To do so, simply remove the screw to pull the old rubber tip out of the door stop. Then, slide the replacement tip in and attach with the screw you removed. And the best part about the installation is that the plunger door stop does NOT have to be removed from the door to replace the rubber tip.
|
|
|
|
Page 9 of 11
|
