|
| |
|
Title/Description |
|
|
|
 |
|
Small Single Magnet Door Catch, Deltana MC325
Small sized single magnet cabinet door catch includes strike plate and mounting screws.
|
|
|
 |
|
Floor Mounted Magnetic Door Stop, Deltana MDHM
The 2 Inch Modern Magnetic Door Holder is installed by floor mounting the catch and mounting the magnet base onto your door. When the door is opened, the magnet catches on to the stainless steel holder, thus securing the door. The floor mounted body is made high-impact black nylon with the inner stainless steel pop-out catch. The Floor Mounted Magnetic Door Stop is available in 2 finishes.
|
|
|
 |
|
Solid Brass 3-1/2 Inch Heavy Duty Magnetic Door Stop, Deltana MDH35
There are 2 main sections to the Magnetic door stop and holders. The 3-1/2 inch long base section has a permanent magnet on the end. It can vertically mount it to the floor or horizontally mount it to the wall or baseboard. The small receptor section is screwed to the door and is spring-loaded to absorb shocks. It is an extra strong magnet for big doors up to 10 feet tall. The heavy duty magnet make this door stop suitable for exterior or interior doors. Both sections of the magnetic door stop offer concealed screw mounting for an elegant installation. It comes packaged complete with mounting anchors and screws for easy installation. The Deltana heavy duty magnetic door stop is made of solid brass construction and available in 9 great finishes. Can also be used to hold open doors with Spring Door Hinges.
|
|
|
 |
|
3 Inch Magnetic Door Stop and Holder, Emtek 2256
The Emtek 2256 Magnetic Door Stop and Holder is made up of a 3 inch long base section--which has a permanent magnet on the end--and the receptor is screwed onto the door. The 3 Inch Magnetic Door Stop can be mounted to the floor, the wall, or the baseboard.
|
|
|
 |
|
Satin Nickel Magnetic Dome Door Stop, Prime Hardware MDS114U15
There are 2 main sections to this Satin Nickel magnetic door stop. The 1-1/4" high dome style base section has a permanent magnet on the face. It is mounted to the floor with the included anchors and screws. The magnet is spring-loaded to absorb shocks.
|
|
|
 |
|
Satin Nickel Magnetic Door Stop, Prime Hardware MDS300U15
The 3" long base section has a permanent magnet on the end. You can vertically mount the base section to the floor or horizontally mount it to the wall or baseboard. The small round spring loaded receptor section is screwed to the door. Both sections of the magnetic door stop offer concealed screw mounting for an elegant installation. Satin Nickel finish.
|
|
|
 |
|
Surface Wall Mount Electromagnetic Door Holder, ABH 2300
Electromagnetic Door Holders like this one are typically used on fire / smoke barrier doors in conjunction with fire alarm systems and a door closer. Durring a non-emergency situation--when the fire alarm is not triggered--the door is held in the open position by a magnet. By itself, it has about 35 lbs. of holding force so the door can be closed manually. When the fire alarm system is triggered, power to the electromagnet cuts off so that a door closer can then close the door. This system has been approved by both the California Fire Marshall and the City of New York's MEA index set by the Department of Buildings. The Surface Wall Mount Electromagnetic Door Holder can also be used on private offices to hold the door open until it is released by a remote switch.
|
|
|
 |
|
Electromagnetic Door Holder Floor Mount, ABH 2600
Electromagnetic Door Holders like the ABH 2600 Electromagnetic Door Holder Floor Mount are typically used on fire / smoke barrier doors in conjunction with fire alarm systems and a door closer. Durring a non-emergency situation--when the fire alarm is not triggered--the door is held in the open position by a magnet. By itself, it has about 30 - 40 lbs. of holding force so the door can be closed manually. When the fire alarm system is triggered, power to the electromagnet cuts off so that a door closer can then close the door. This system has been approved by both the California Fire Marshall and the City of New York's MEA index set by the Department of Buildings. The Flush Wall Mount Electromagnetic Door Holder can also be used on private offices to hold the door open until it is released by a remote switch.
|
|
|
 |
|
Flush Wall Mount Electromagnetic Door Holder, ABH 2400
The ABH 2400 Flush Wall Mount has a 1-7/8 inch total projection from wall to the face of the door. Electromagnetic Door Holders like this one are typically used on fire / smoke barrier doors in conjunction with fire alarm systems and a door closer. Durring a non-emergency situation--when the fire alarm is not triggered--the door is held in the open position by a magnet. By itself, it has about 35 lbs. of holding force so the door can be closed manually. When the fire alarm system is triggered, power to the electromagnet cuts off so that a door closer can then close the door. This system has been approved by both the California Fire Marshall and the City of New York's MEA index set by the Department of Buildings. The Flush Wall Mount Electromagnetic Door Holder can also be used on private offices to hold the door open until it is released by a remote switch.
|
|
|
 |
|
Recessed Wall Mount Electromagnetic Door Holder, ABH 2100
The ABH 2100 Recessed Wall Mount has a 2-5/8 inch total projection from wall to the face of the door. Electromagnetic Door Holders like this one are typically used on fire / smoke barrier doors in conjunction with fire alarm systems and a door closer. Durring a non-emergency situation--when the fire alarm is not triggered--the door is held in the open position by a magnet. By itself, it has about 35 lbs. of holding force so the door can be closed manually. When the fire alarm system is triggered, power to the electromagnet cuts off so that a door closer can then close the door. This system has been approved by both the California Fire Marshall and the City of New York's MEA index set by the Department of Buildings. The Recessed Wall Mount Electromagnetic Door Holder can also be used on private offices to hold the door open until it is released by a remote switch.
|
|
|
 |
|
Solid Brass 3 Inch Magnetic Door Stop, Deltana MDH30
There are 2 main sections to this magnetic door stop. The 3 inch long base section has a permanent magnet on the end. It can vertically mount it to the floor or horizontally mount it to the wall or baseboard. The small round receptor section is screwed to the door and is spring-loaded to absorb shocks. Both sections of the magnetic door stop offer concealed screw mounting for an elegant installation. It is packaged complete with mounting anchors and screws for easy installation. The 3 Inch Magnetic Door Stop is made of solid brass construction to last and available in 9 great finishes.
|
|
|
 |
|
Stainless Steel Magnetic Dome Door Stop, Deltana DSM125U32x
There are 2 main sections to the magnetic door stop. The 1-3/8 inch high dome style base section has a permanent magnet on the face. It is mounted to the floor with the included base, anchors and screws. The magnet is spring-loaded to absorb shocks. The 1 inch diameter round holder section is screwed to the door for the magnet catch to hold it in the open position. The Deltana made magnetic door stop is made of stainless steel and is available in Polished or Brushed stainless finishes.
|
|
|
 |
|
Magnetic Roller Catch, AHI SIG711
These brushed stainless steel finish roller catch uses a permanent magnet to hold a door closed. The magnetic roller catchThis brushed stainless steel finish roller catch uses a magnet to hold a door closed. The magnetic roller catch can be installed in the top, bottom, or side edge of a door. Packaged with installation screws and T-strike plate. Packaged complete with stainless steel flush bolt assembly, strike plate and mounting screws.
a door. Packaged with installation screws and T-strike plate.
|
|
|
 |
|
Large Sized Steel Magnetic Catch, Deltana MC327
Heavy duty cabinet door holder with quad (4) magnets for strong holding power. Package with 2 strike plates and mounting screws for quick and easy installation.
|
|
|
 |
|
Medium Sized Magnetic Catch, Deltana MC326
Medium size double magnet cabinet door catch. 3 1/8" x 1 " x 9/16" includes strike plate and mounting screws.
|
|
|
 |
|
Flush Magnetic Door Stop, Deltana MDHF25
An elegantly styled magnet door stop and holder, the Deltana MDHF25 Flush Magnetic Door Stop is great to use when you need a very low profile floor mounted base to reduce the risk of potential tripping or to ease floor cleaning. The round strike plate is 2-3/8 inches in diameter and mounts flush on the floor. The magnet is screwed on bottom of the door. When the magnet approaches the strike, an arm raises up to 3/4 inch to stop and hold the door. Packaged complete with mounting anchors and matching finish mounting screws.
|
|
|
 |
|
Solid Brass Magnetic Dome Door Stop, Deltana DSM125
There are 2 main sections to the magnetic door stop. The 1-3/8 inch high dome style base section has a permanent magnet on the face. It is mounted to the floor with the included base, anchors and screws. The magnet is spring-loaded to absorb shocks. The 1 inch diameter round holder section is screwed to the door for the magnet catch to hold it in the open position. The Solid Brass Magnetic Dome Door Stop is of brass and available in 9 different finish colors.
|
|
|
 |
|
Magnetic Cylinder Door Stop, Prime Hardware MDS134U15
This magnetic cylinder door bumper is mounted to the floor, allowing the bottom of the door to contact it. Magnet ring goes all the way around the cylinder base allowing you to install it just about anywhere on the floor for door contact.
|
|
|
 |
|
Satin Nickel Magnetic Floor Door Stop, Prime Hardware MDS014U15
This low profile magnetic floor mount door stop is typically used in residential and medium duty commercial applications. The low profile floor mounted door stop is made of zinc alloy and finished in Satin Nickel.
|
|
|
 |
|
Window and Shutter Hardware
Optimize your home's security with window and shutter locks. We offer solid brass locks for both shutters and windows in an assortment of styles, most of which are available in variety of finishes including polished brass, satin nickel, and oil rubbed bronze.
|
|
|
|
Page 1 of 3
|
